20+ Years Experience
Specialist Wetpour Repair
We are Wetpour Repair specialists who have repaired hundreds of thousands of metres of surfacing throughout the UK.
With repairers based throughout the UK we can offer competitive prices and in April 2024 are able to get repairs to you very quickly.
Wetpour repairs and refurbishment for play areas in the UK are very common.
If you have a damaged play area surface in April 2024 or the perimeter of the playground surfacing has come away from the edge, you need to get the wetpour repaired asap.
Costs can spiral out of control if you do not get a specialist contractor to fix the repairs due to vandalism making the rubber surface area larger that needs repairing.
Or even worse if someone has an accident in your play area, the facility owner has a legal responsibility to make sure the playground surfacing is fit for purpose and safe.
We have a dedicated team of installers with a wealth of experience that solely focus on repairing wetpour surfaces all over the UK.
Get in touch today and receive best cost-effective rates guaranteed on the wetpour repair works you require.
We offer a number of great wetpour repairs and are more than happy in assisting you on anything you need more information on.
Whether you require small repairs to fix minor damage or you need brand new rubber surfacing installed for the affected area, we can offer you a wide variety of options to repair your playground surfacing and restore its durability and safety.
Here are the different types of wet pour repairs:
The most common wetpour repair is when the edges of a wetpour surfacing have pulled away, due to weathering or shrinkage of the rubber and polyurethane resin binder material.
The best solution is to cut back up to 300mm and resurface in a contrasting colour band repair.
The contrasting colour makes the repair look like a frame around the surfacing and gives a decorative design finish.
As wet pour shrinks then any graphics installed or day joints is a point of weakness of the surface area and will need repairing in its lifetime.
Similar to wet pour perimeter repairs you cut back to give a suitable clean edge to install up to and resurface usually in a contrasting colour to add to the playground design.
Cracking on wet pour playground surfaces is common when the sub base is not fully compacted.
Any sub base movement can cause the surfacing to crack and a simple cut out and replace of the cracked areas will suffice.
After removing playground equipment the foot holes need filling in on wetpour areas.
It is common to create wetpour designs like splashes or circles in the wetpour repair surfaces.
The play equipment repairs are normally carried out before any flooring requirements are ordered.
Vandalism to wet pour safety surfacing is common in public parks where vandals set fire to bins or benches that damage the rubber floor.
It is easy to cut back and replace the damaged area of the wetpour surface and while the professional installers are onsite can also resurface any faulty areas causing trip hazards.
For more information on patch repairs or repairing the surrounding area, make sure to contact our team regarding repair kits and other options for small areas.
If you would like to receive even more information on wetpour repairs, make sure you get in touch with us today!
Although a full wetpour resurface can be seen as being a new install it still forms part of maintenance and repairs are needed to existing surface and chase cut to the edging prior to full resurfacing installation are carried out.
Resurfacing of wetpour rubber areas are popular when the floor is starting to fret and if over 8 years old so in need of a face lift.
After a resurface has been carried out, the wetpour should last for years depending on usage and atmospheric conditions due to its high durability and the surfacing is UV resistant.
The price of Wetpour repair kits can vary depending on the color, and size.
The usual cost of a Black Repair Kit is £35 and a Colour Repair Kit £45 you can also get a Basic Repair Kit that will cost around £25.
Prices are subject to change, you can find out more about the wetpour repairs kit costs by contacting us!
Here are the most popular facilities where we carry out wetpour repair services:
Here are the most common colours used on a wetpour repair:
It is important to remember the repair will not be the exact same colour as the existing playground surface.
When carrying out a patch repair it may be an idea to have a look at the range of colours and use an alternative colour to create a unique design.
Wet pour repair kits are a bucket of materials that include EPDM rubber and polyurethane binder glue for a do it yourself repair.
Within the wetpour repair kit, you will find the perfect ratio of rubber crumb material and polyurethane resin.
Costs of a wet pour repair kit are less than £40 each to purchase, but we always strongly recommend getting a professional installer to repair damaged areas if it is larger than 1m2.
If you require anymore information on the cost to supply a wetpour repair kit, please contact our team using our enquiry form today.
Wet pour is a low maintenance safety surface specification.
It is advised to clean the rubber playground surface area and a regular brush will remove dirt and natural debris which can get stuck within the pores of the wetpour system. This can lead to waterlogging in wet conditions.
A proactive maintenance plan is always advised but a reactive wetpour repair needs to be taken very seriously and repaired at the earliest possible opportunity.
At Wetpour Repair, we can assist you on the best options available. Make sure you contact us today for a number of great wetpour repair services.
Wetpour shrinkage can occur on any installation.
The weakest points tend to be around the perimeter or between day joints or where two colours meet.
There is no known reason why this happens and can happen to safety surfacing of any colour, any depth and installed on any sub base.
Repairs should not be undertaken in the first 12 months of newly installed wet pour surfaces wherever practically possible as this is the period where the majority of shrinking occurs and if done too early after the original installation then the shrinkage is very likely to continue and the repairs need redoing.
The wider the area of surfacing the more the wet pour surface is likely to see the effects of shrinkage.
Whilst narrow pathways still shrink the effect is less noticeable.
Compacted stone bases when the wetpour shrinks tend to need the repairs the most.
This is because some of the mot stone is taken with the shrinking wetpour.
This causes the moving stone to rise over the fixed stone causing a lifting effect which can lead to trip points.
There is also a tendency to lift the raised playground surfacing to investigate the issue, this can lead to more stone movement adding to the lifting effect.
The best advice to any facility owner is to repair damaged wetpour areas at the earliest convenience.
The longer you leave the unsafe rubber crumb surface the wider the problem.
It opens legal responsibility complaints or higher costs with the area size increasing that needs damaging.
A wetpour repair is usually needed when inspecting parks in the UK.
The shrinkage around the edges can be easily cut back and replaced with new EPDM rubber granules.
We regularly specify remedial works to be done straight away.
A wetpour repair can create funky patterns or designs on the surface, particularly if we carry out patch repairs.
It is very important to repair as soon as possible because damaged or faulty wet pour flooring can create a trip hazard for children to injure or have an accident.
We install wetpour surfacing nationwide in the UK and can offer competitive prices for both the supply of materials and installation of wet pour rubber crumb surfaces.
Our specialist wetpour repair team are working for councils and facility owners daily and we can try to cost jobs when in the local area to keep costs down to a minimum.
To find out more about wetpour repair kits or to receive a free quotation for us to complete the playground surfacing repair, please fill in our enquiry form.
Make sure to include the area size and your location when you contact us so we can give an accurate price.
You should leave the adhesive to cure for 24 hours, subject to weather conditions. Once dry you can enjoy your new outdoor area.
A rubber Wetpour surface will last between 10-15+ years if installed and maintained properly.
The Wetpour thickness can be anything between 15mm to 55mm in 5mm increments.
Since rubber naturally comes with a high coefficient of friction and maintains high amounts of friction even when wet, it is a naturally superior choice of material for non-slip flooring options.
Commonly Wetpour surfaces are low maintenance bit it is very important to have a routine wetpour maintenance schedule to adhere to, the main goal of this is to ensure the surface remains free of dirt and moss which can reduce its porosity and its slip resistance.
If you notice any damage to the surface it must be repaired in a timely fashion, to guard against any further deterioration.
Make sure you contact us today for a number of seamless wetpour repairs.
We absolutely love the service provided. Their approach is really friendly but professional. We went out to five different companies and found Wetpour Repair to be value for money and their service was by far the best. Thank you for your really awesome work, we will definitely be returning!
Ashton MarshallWe have used Wetpour Repair for many years as they are certainly the best in the UK. The attention to detail and professional setup is what makes this company our go-to company for all our work. I highly recommend the team for the immense work - we highly recommend them!
Connor RyanFor more information on wetpour repair, fill in the contact form below to receive a free quote today.
We Aim To Reply To All Enquiries With-in 24-Hours